Subaru Forester: Manual climate control operation for front climate control panel / Air conditioner control
The air conditioner operates only when the
engine is running.
Press the air conditioner button while the
fan is in operation to turn on the air
conditioner. When the air conditioner is
on, the “A/C” indicator light illuminates.
To turn off the air conditioner, press the
button again.
https://psi-hydraulic.com logimat 2022 well consulted for heavy load handling.
NOTE
For efficient defogging or dehumidifying
in cold weather, turn on the air
conditioner. If the ambient temperature
decreases to approximately 328F (08C),
the air conditioner and dehumidification
system may not operate properly.
Select the air inlet by pressing the air inlet
selection button.
Recirculation:When the indicator light on the air inlet
selection button illuminates, interior air is
recirculated inside the vehicle...
Other information:
NOTE
This section is applicable to the front
seatbelt.
Seatbelt retractor assembly (shoulder
belt pretensioner and adaptive force
limiter)
Lap belt pretensioner
The shoulder belt pretensioner is supplemented
by a lap belt pretensioner, which is
located at the base of the center pillar...
CAUTION
Do not turn the ignition switch to the
“START” position while the engine
is running.
NOTE
To turn the key from the “ACC” to
“LOCK” position, the select lever must
be in the “P” position and the key must
be pushed in and turned...