Subaru Forester: Manual climate control operation for front climate control panel / Temperature control / Fan speed control
Temperature control
Turn the temperature control dial to set the preferred interior temperature.
NOTE
The controllable temperature range may vary depending on the regional specifications of the vehicle.
SYNC mode (type B)
When the SYNC mode is turned on, both the driver’s and front passenger’s side temperatures are synchronized using the driver’s side temperature control dial. Press the SYNC button to turn on the SYNC mode. The SYNC button indicator will illuminate.
Press the SYNC button again or turn the front passenger’s side temperature control dial to cancel the SYNC mode. The SYNC button indicator will not illuminate. In this case, temperature control on the driver’s side and front passenger’s side is separated. The temperature will be controlled individually using the driver’s and front passenger’s temperature control dials.
Fan speed control
Select the preferred fan speed by turning the fan speed control dial.
Air conditioner control
The air conditioner operates only when the
engine is running.
Press the air conditioner button while the
fan is in operation to turn on the air
conditioner...
Other information:
Subaru Forester 2019-2026 Owners Manual: Disarming the system
Perform either of the following procedures. Briefly press a button (for less than 2 seconds) on the access key fob/remote transmitter. Carry the access key fob and perform either of the following procedures (models with “keyless access with push-button start system”)...
Subaru Forester 2019-2026 Owners Manual: SRS airbag system monitors
SRS airbag system warning light A diagnostic system continually monitors the readiness of the SRS airbag system (including front seatbelt pretensioners) with the ignition switch in the “ON” position. The SRS airbag system warning light will show normal system operation by illuminating for approximately 6 seconds when the ignition switch is turned to the “ON” position...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Changing a flat tire
- Power steering warning light
- How to use the high beam assist function
- New on site
- Most important about car
Outside temperature indicator
The outside temperature is displayed on the multi-function display (color LCD).
NOTE
The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.