Kia Telluride (LQ2, 2027-2026) Owner's Manual / Driver adjustments / Lighting / Battery saver function

Subaru Forester: Lighting / Battery saver function

This feature is designed to protect the vehicle battery from excessive discharge if the exterior lights are accidentally left on. Once the engine is turned off and the driver's door is opened, the system automatically switches off the position lamps.

However, if you operate the lighting switch after the vehicle has been turned off, the position lamps will remain illuminated even with the driver's door open.

If you intentionally want the lights to stay on after parking your Kia Telluride, switch the position lamps off and then back on again using the headlamp switch located on the steering column.

Lighting

The Kia Telluride is equipped with a comprehensive lighting system d..

Headlight delay function

If the vehicle is switched to the OFF or ACC position while the headlamps are on, both the headlamps and position lamps will remain illuminated for approximately five minutes, helping light your path after leaving the vehicle...

Other information:

Subaru Forester 2019-2026 Owners Manual: How to use this Owner's Manual

Using your Owner's Manual Before you operate your vehicle, carefully read this manual. To protect yourself and extend the service life of your vehicle, follow the instructions in this manual. Failure to observe these instructions may result in serious injury and damage to your vehicle...

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Rear Cross-traffic Collision-avoidance Assist (RCCA)

Rear Cross-traffic Collision-avoidance Assist is designed to help detect vehicles approaching from the left or right behind the Kia Telluride while reversing. When a possible collision risk is detected, the system can warn the driver with a message and audible alert, and it may also assist with braking to help reduce the chance of a collision...