Subaru Forester: Starting and operating / Vehicle Dynamics Control system

Electronic Brake Force Distribution (EBD) system

The EBD system maximizes the effectiveness of the brakes by allowin..

Safety precautions

WARNING Always use the utmost care in driving – overconfidence because you are driving a vehicle with the Vehicle Dynamics Control system could easily lead to a serious accident...

Other information:

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Highway Lane Change Assist (if equipped)


Display and control The status of the Highway Lane Change Assist system in your Kia Telluride is conveniently monitored directly through the instrument cluster. For a deeper understanding of these visual cues and how to navigate the settings, please refer to the comprehensive LCD display modes section in your owner's manual...

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Supplemental Restraint System (SRS) components and functions


The actual locations of the SRS components in the Kia Telluride may vary slightly from those shown in the illustration. The Supplemental Restraint System includes the following major components: Front impact sensors Front passenger air bag module SRS control module (SRSCM) with integrated rollover sensor Side pressure sensors Front side air bag modules Side impact sensors Curtain air bag modules Driver's knee air bag module Driver's front air bag module SRS air bag warning light Occupant Detection System (ODS) Front driver and passenger seat belt buckle sensors Front center side air bag module Seat belt retractor pretensioner assemblies Second-row side air bag module The SRSCM continuously monitors the operating status of every SRS component whenever the ENGINE START/STOP button is in the ON position and for approximately three minutes after the ignition is switched off...

Categories

Type B multi-function display (color LCD)

Turn the ignition switch to “ON”.

Subaru Forester. Type B multi-function display (color LCD)

Press the Subaru Forester. Type B multi-function display (color LCD) button. Select “Settings”. Select “Vehicle”. Select “Time/Date” and then select “Manual”.

Subaru Forester. Type B multi-function display (color LCD)

Set the each items plus and minus. Select Subaru Forester. Type B multi-function display (color LCD) to complete the clock setting.

read more

 
Copyright © 2026 www.suforester5.com