Subaru Forester: Instrument cluster / Adjusting instrument cluster illumination
You can customize the brightness of the instrument cluster illumination by pressing the illumination control buttons ("+" or "-") whenever the ENGINE START/STOP button is in the ON position or when the exterior lights are switched ON. Adjusting the brightness allows the Kia Telluride instrument panel to remain comfortable to read during both daytime and nighttime driving.
|
WARNING
Never adjust the brightness of the instrument cluster while driving. Diverting your attention from the road may reduce vehicle control and increase the risk of an accident that could result in serious injury, death, or property damage.
Warning and indicator lights
The warning and indicator lights in the Kia Telluride provide important information about the operating status of vehicle systems. They notify the driver when specific functions are active and alert you whenever a system requires attention or immediate action, helping you operate the vehicle safely ..
Other information:
Subaru Forester 2019-2026 Owners Manual: After deployment
After the deployment, the SRS side airbag immediately starts to deflate. The time required from detection of an impact to deflation of an SRS side airbag after deployment is shorter than the blink of an eye. The SRS curtain airbag remains inflated for a while following deployment then slowly deflates...
Subaru Forester 2019-2026 Owners Manual: Reverse tilt-down feature (if equipped)
When backing up the vehicle, the front passenger’s side outside mirrors will turn downward automatically to provide better rear visibility. Push the ignition switch to the ON position. Move the select lever to the R (Reverse) position. The outside mirror angle moves downward...
Categories
- Manuals Home
- Alarm system setting
- Steering Responsive Headlight (SRH)
- Changing a flat tire
- New on site
- Most important about car
How to get the source code using the open source
Free/Open Source Software Information
This product contains Free/Open Source Software (FOSS).
The license information and/or the source code of such FOSS can be found at the following URL.
http://www.globaldenso.com/en/opensource/ivi/subaru/
