Subaru Forester: Idle Stop and Go (ISG) / Deactivating the ISG
-
To deactivate ISG, press the ISG OFF button. The indicator light on the button illuminates.
-
To reactivate ISG, press the ISG OFF button again. The indicator light on the button turns off.
The Idle Stop & Go (ISG) system in the Kia Telluride is designed..
If an ISG-related sensor or system fault occurs, the Idle Stop & Go system may not operate normally, and the following indications may appear:
The yellow AUTO STOP indicator () blinks for approximate..
Other information:
Use windshield washer fluid. If windshield
washer fluid is unavailable, use clean
water.
In areas where water freezes in winter, use
an anti-freeze type windshield washer
fluid.
If you fill the reservoir tank with a fluid with
a different concentration from the one
used previously, purge the old fluid from
the piping between the reservoir tank and
washer nozzles by operating the washer
for a certain period of time...
The gauges in your Kia Telluride provide real-time operating information, allowing you to monitor important vehicle systems and driving conditions at a glance.
Speedometer
Figure 1. Type A
Figure 2...