Subaru Forester: Function settings / Function settings and adjustments on the combination meter display (color
LCD)
If your vehicle is equipped with a combination meter display (color LCD),
setting adjustments to the following items can be manually
changed within the display to meet your personal requirements.
NOTE
- If your vehicle is not equipped with a combination meter display
(color LCD), setting changes to the following items will
need to be performed by a SUBARU dealer. Refer to “Function settings and
adjustments performed by a dealer”.
- For setting adjustments to the following items, refer to the
appropriate page for details.



*1: U.S.-spec. models
*2: You can also set this while driving.
*3: If equipped
Individual settings and adjustments excluding combination meter display
(color LCD)
For setting adjustments to the following items, refer to the appropriate page
for details.

A SUBARU dealer can change the setting adjustments of the following items to
meet your personal requirements. Contact the nearest
SUBARU dealer for details...
Other information:
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off.
Perform the following steps to deactivate
the audible signal. You can also use the
same steps to restore the function...
Antennas
Operating range
NOTE
If the access key fob is not detected
within the operating range of the antennas
inside the vehicle, the push-button
ignition switch and the engine start
cannot be operated.
Even when the access key fob is
outside the vehicle, if it is placed too
close to the glass, it may be possible to
switch the power or to start the engine...