Subaru Forester: Replacing bulbs / Headlights
The LED headlight warning light illuminates if the LED headlights malfunction. Have your vehicle inspected at a SUBARU dealer as soon as possible.
Replacing bulbs
It may be difficult to replace the bulbs. We
recommend that you hav..
Front turn signal light
Right-hand side
Use a screwdriver to remove the clips
on the air intake duct, then remove the
duct.
Left-hand side
Use a screwdriver to remove the
secured clip of the washer tank...
Other information:
Subaru Forester 2019-2024 Owners Manual: How to lock and unlock the vehicle using the key
Rotate the key toward the front to lock. Rotate the key toward the rear to unlock. In this case, only the driver’s side door is locked or unlocked. NOTE Models with “keyless access with push-button start system”: The emergency key is directional...
Subaru Forester 2019-2024 Owners Manual: Programming a New HomeLink Button
Indicator Light HomeLink Buttons Press and release the HomeLink button that you would like to program. The HomeLink indicator light will flash orange slowly (if not, refer to “Erasing HomeLink Buttons”). Garage door opener remote Position the hand-held remote (garage door opener remote) 1 to 3 inches (2 to 8 cm) away from the HomeLink button that you would like to program...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- To activate/deactivate the X-MODE
- How to use the high beam assist function
- Disabling functions
- New on site
- Most important about car
Type B multi-function display (color LCD)
Turn the ignition switch to “ON”.
button.
Select “Settings”.
Select “Vehicle”.
Select “Time/Date” and then select “Manual”.
to complete the
clock
setting.
Copyright © 2024 www.suforester5.com