Other information:
If the select lever cannot be operated, turn
the ignition switch back to the “ON”
position then move the select lever to the
“P” position with the select lever button
pressed and the brake pedal depressed.
If the select lever does not move after
performing the above procedure, check
and confirm the following and release the
shift lock accordingly...
Change to the low beam:
When you return the turn signal lever to the
center position, the high beam assist
function will turn off and the high beam
assist indicator light will turn off.
Change to the high beam:
When you turn the light control switch to
the position, the headlight mode
will
be changed to the high beam...
anytime you want.