Subaru Forester: Maintenance and service / Brake pedal
Check the brake pedal free play and
reserve distance according to the maintenance
schedule in the “Warranty and
Maintenance Booklet”.
The disc brakes have audible wear indicators
on the brake pads. If the brake
pads wear close to their service limit, the
wear indicator makes a very audible
scraping noise when the brake pedal is
applied...
Other information:
Change to the low beam:
When you return the turn signal lever to the
center position, the high beam assist
function will turn off and the high beam
assist indicator light will turn off.
Change to the high beam:
When you turn the light control switch to
the position, the headlight mode
will
be changed to the high beam...
Turn the engine OFF.
Make sure the driver's door is unlocked.
Press the rear center edge of the fuel filler door.
Pull the fuel filler door outward until it is fully open...
Categories

When units in miles is selected
When units in km is selected
This display shows the average vehicle
speed since the trip meter was last reset.
Pressing the TRIP RESET switch toggles
the display between the average vehicle speed corresponding to the A trip meter
display and the average vehicle speed
corresponding to the B trip meter display.
When either of the trip meter displays is
reset, the corresponding average vehicle
speed value is also reset.
read more