Subaru Forester: Cleaning the interior / Monitor
To clean the audio/navigation/multi-function
display monitor, wipe it with a silicone
cloth or with a soft cloth. If the monitor is
extremely dirty, clean it with a soft cloth
moistened with neutral detergent then
carefully wipe off any remaining detergent.
CAUTION
- Do not spray neutral detergent
directly onto the monitor. Doing
so could damage the monitor’s
components.
- Do not wipe the monitor with a
hard cloth. Doing so could
scratch the monitor.
- Do not use cleaning fluid that
contains thinner, fuel, or any
other volatile substance. Such
cleaning fluid could erase the
lettering on the switches at the
bottom of the monitor.
Other information:
WARNING
Do not put any objects (including
straps or cords) over the steering
wheel pad, column cover, or
dashboard.
These objects could be entangled
with the steering
wheel, preventing the SRS
frontal airbag, etc. from operating
properly...
ON
DOOR
OFF
The dome light switch has the following
three positions.
ON: The light remains on continuously.
OFF: The light remains off.
DOOR: The dome light illuminates automatically
in the following cases.
Any of the doors or the rear gate is
opened...
Categories
The outside temperature is displayed on
the multi-function display (color LCD).
NOTE
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following conditions.
While parking or driving at low
speeds
When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
When starting the engine after
being parked for a certain period of
time
The temperature unit cannot be
changed.
read more