Subaru Forester: Maintenance and service / Continuously variable transmission fluid
It is not necessary to check the transmission
fluid level. Check that there are no
cracks, damage or leakage. However, the
fluid inspection should be performed according
to the maintenance schedule in
the “Warranty and Maintenance Booklet”.
Consult your SUBARU dealer for details.
It is unnecessary to check the deflection of
the drive belt periodi..
It is not necessary to check the gear oil
level. Check that there are no cracks,
damage or leakage. However, the oil
inspection should be performed according
to the maintenance schedule in the “Warranty
and Maintenance Booklet”...
Other information:
SUBARU warranties do not apply to
vehicle damage or malfunction caused by
trailer towing. If you use your vehicle to tow
a trailer, more frequent maintenance will
be required due to the additional load.
(Refer to “Maintenance schedule under
severe driving conditions” in the “Warranty
and Maintenance Booklet”...
Press the AUTO button. The indicator
light “FULL AUTO” on the multi-function
display (color LCD) illuminates.
Set the preferred temperature using
the temperature control dial.
NOTE
If you operate any of the buttons on the
control panel other than the ON/OFF
button, the rear window defogger button,
the SYNC button (if equipped) and
the temperature control dial(s) during
FULL AUTO mode operation, the
“FULL” indicator light on the control
panel will turn off and the “AUTO”
indicator light will remain illuminated...