Subaru Forester: Maintenance and service / Replacing key battery
The access key fob/transmitter battery
may be discharged under the following
conditions.
- The operation of the keyless access
function is unstable.
- The operating distance of the remote
keyless entry system is unstable.
- The transmitter does not operate properly
when used within the standard distance.
Replace the battery with a new one.
CAUTION
Do not let dust, oil or water get on
or in the access key fob/transmitter
when replacing the battery.
Before replacing the battery, remove
any static electricity...
Other information:
To clean the audio/navigation/multi-function
display monitor, wipe it with a silicone
cloth or with a soft cloth. If the monitor is
extremely dirty, clean it with a soft cloth
moistened with neutral detergent then
carefully wipe off any remaining detergent...
CAUTION
Do not operate the starter motor
continuously for more than 10 seconds.
If the engine fails to start after
operating the starter for 5 to 10
seconds, wait for 10 seconds or
more before trying again.
NOTE
It may be difficult to start the engine
when the battery has been disconnected
and reconnected (for maintenance
or other purposes)...