Subaru Forester: Tires and wheels / Wheel replacement

When replacing wheels due, for example, to damage, make sure the replacement wheels match the specifications of the wheels that are fitted as standard equipment. Replacement wheels are available at your SUBARU dealer.

WARNING

Use only those wheels that are specified for your vehicle. Wheels not meeting specifications could interfere with brake caliper operation and may cause the tires to rub against the wheel well housing during turns. The resulting loss of vehicle control could lead to an accident.

NOTE

When any of the wheels are removed and replaced for tire rotation or for any other reason, always check the tightness of the wheel nuts after driving approximately 600 miles (1,000 km). If any nut is loose, tighten it to the specified torque.

    Tire replacement

    T..

    Alloy wheels

    Alloy wheels can be scratched and damaged easily. Handle them carefully to maintain their appearance, performance, and safety. When any of the wheels are removed and replaced for tire rotation or to change a flat tire, always check the tightness of the wheel nuts after driving approximate..

    Other information:

    Kia Telluride (LQ2, 2027-2026) Owner's Manual: Tires and wheels


    Tire care Proper tire maintenance is vital to ensure maximum driving safety, optimal vehicle handling, extended tread life, and peak fuel efficiency for your Kia Telluride. To achieve these results, you must consistently monitor cold tire inflation levels, adhere strictly to recommended pressure specifications, and stay within the designated vehicle load capacity and weight distribution limits...

    Subaru Forester 2019-2026 Owners Manual: SRS airbag system monitors


    SRS airbag system warning light A diagnostic system continually monitors the readiness of the SRS airbag system (including front seatbelt pretensioners) with the ignition switch in the “ON” position. The SRS airbag system warning light will show normal system operation by illuminating for approximately 6 seconds when the ignition switch is turned to the “ON” position...

    Categories

    Outside temperature indicator

    The outside temperature is displayed on the multi-function display (color LCD).

    NOTE

    The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.

    read more

     
    Copyright © 2026 www.suforester5.com