Subaru Forester: Opening and closing / Power liftgate: (if equipped)

Power liftgate operating conditions

The Kia Telluride power liftgate is designed to provide convenient access to the cargo area while maintaining safe operation. The system operates when the vehicle is running and the transmission is in P (Park). When the vehicle is OFF, the liftgate can still be operated regardless of gear position. For safety reasons, the liftgate can only be opened when the vehicle speed is below 1.8 mph (3 km/h).

Before opening or closing the power liftgate, always confirm that the transmission is in P (Park) whenever possible.

WARNING

  • Never leave children or pets unattended inside your Kia Telluride. Children may accidentally operate the power liftgate, which could result in injury to themselves, other people, or damage to the vehicle.

    Kia Telluride recommended safety clearance around the power liftgate
    1. 27 inches (70 cm)

    2. 27 inches (70 cm)

  • Before operating the power liftgate or Smart Liftgate, make sure the opening area is completely clear of people, animals, and nearby objects. Contact with the moving liftgate can cause serious injury or damage to the vehicle or surrounding property such as walls, garage doors, ceilings, or nearby vehicles.

  • Under the following conditions, the liftgate may not open normally or could close unexpectedly, creating a risk of injury:

    • Snow or ice has accumulated on the liftgate.

    • A heavy accessory or cargo item, such as a bicycle rack or ladder, is attached to the liftgate.

  • Always remove accumulated snow, ice, or heavy accessories before attempting to operate the liftgate.

NOTE

  • Avoid forcing the liftgate open or closed by hand during normal operation. Manual operation may damage the Kia Telluride power liftgate mechanism. If manual movement is necessary because the battery is discharged or disconnected, move the liftgate carefully without applying excessive force.

  • When the engine is not running, avoid operating the power liftgate more than ten consecutive times. Frequent operation with the engine off may discharge the vehicle battery.

  • Do not leave the power liftgate open longer than necessary, as doing so can gradually reduce battery charge.

  • Do not apply excessive force while the liftgate is moving. Interfering with its operation may damage the power liftgate components.

  • Never hold or pull on the liftgate support struts. Damaging or bending the support struts can affect proper liftgate operation and may result in vehicle damage or personal injury.

    Kia Telluride liftgate support struts and safe handling
  • Do not attempt to modify, disassemble, or repair any part of the power liftgate yourself. Service should always be performed by an authorized Kia dealer.

  • The power liftgate may not function correctly under the following conditions:

    • When one side of the vehicle is raised for maintenance or tire replacement.

    • When the vehicle is parked on a steep incline or other uneven surface.

  • Before entering an automatic car wash, completely close the liftgate and lock all doors and the liftgate using the central door lock switch.

  • Avoid directing high-pressure water directly onto the exterior power liftgate open/close button, as this could unintentionally activate the liftgate.

NOTE

  • If the liftgate is not completely latched and vehicle speed reaches or exceeds 1.8 mph (3 km/h), the warning chime will sound ten times. Park the Kia Telluride in a safe location, securely close the liftgate, and verify that the liftgate warning indicator on the instrument cluster has turned off.

  • During freezing weather, ice may prevent the exterior power liftgate button from operating normally. Remove any ice buildup before using the button, or operate the liftgate with the smart key or the interior liftgate control instead.

  • Operating the power liftgate more than five consecutive times may temporarily disable the system to protect the liftgate motor from overheating. If this occurs, pressing any liftgate control button will produce three warning chimes while the liftgate remains closed. Allow the system to cool for approximately one minute before attempting to operate it again.

Liftgate

WARNING Exhaust fumes Never drive your Kia Telluride with the ..

Operating the power liftgate

Power liftgate open/close button (smart key, instrument panel): (if equipped) Press and hold the power liftgate open/close button for approximately one second...

Other information:

Subaru Forester 2019-2026 Owners Manual: Vehicle capacity weight


Vehicle placard The load capacity of your vehicle is determined by weight, not by available cargo space. The maximum load you can carry in your vehicle is shown on the vehicle placard attached to the driver’s side door pillar. It includes the total weight of the driver and all passengers and their belongings, any optional equipment such as a trailer hitch, roof rack or bike carrier, etc...

Subaru Forester 2019-2026 Owners Manual: Operation


NOTE The rear gate will remain unlocked even after closing it. Always lock the rear gate when leaving the vehicle. If you cannot open/close the rear gate by performing the operation described here, a short electronic chirp will sound three times (beep, beep, beep)...

Categories

Type B multi-function display (color LCD)

Turn the ignition switch to “ON”.

Subaru Forester. Type B multi-function display (color LCD)

Press the Subaru Forester. Type B multi-function display (color LCD) button. Select “Settings”. Select “Vehicle”. Select “Time/Date” and then select “Manual”.

Subaru Forester. Type B multi-function display (color LCD)

Set the each items plus and minus. Select Subaru Forester. Type B multi-function display (color LCD) to complete the clock setting.

read more

 
Copyright © 2026 www.suforester5.com