Subaru Forester: Power liftgate: (if equipped) / Emergency liftgate safety release

Kia Telluride emergency liftgate safety release access panel
Kia Telluride emergency liftgate release latch location

If the liftgate must be opened manually from inside the luggage compartment, perform the following procedure:

  1. Remove the access cover located at the bottom of the liftgate.
  2. Slide the emergency release latch in the direction indicated by the arrow to unlock the liftgate.
  3. Push the liftgate outward to open it.

    WARNING

    • Become familiar with the location and operation of the emergency liftgate safety release before an emergency occurs. This allows you to exit safely if you ever become accidentally locked inside the luggage compartment.

    • Never allow people or animals to ride inside the luggage compartment. This area is not intended for passengers and can become extremely dangerous during sudden braking or a collision.

    • Use the emergency release mechanism only when necessary. Exercise extreme caution if the vehicle is moving or stopped in traffic.

    Resetting the power liftgate

    Under certain conditions, the Kia Telluride power liftgate may requi..

    Power liftgate automatic close

    Using the power liftgate automatic close feature With the liftgate fully open, stand within the detection area approximately 20–40 inches (50–100 cm) behind the vehicle while carrying the smart key...

    Other information:

    Kia Telluride (LQ2, 2027-2026) Owner's Manual: Driver Attention Warning settings


    Driver Assistance Driver Attention Warning Leading Vehicle Departure Alert Inattentive Driving Warning While the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Driver Attention Warning on the infotainment system screen to adjust the available DAW functions...

    Subaru Forester 2019-2026 Owners Manual: Vehicle Dynamics Control operation indicator light


    The indicator light flashes during activation of the skid suppression function and during activation of the traction control function. NOTE The light may remain illuminated for a short period of time after the engine has been started, especially in cold weather...

    Categories

    Type B multi-function display (color LCD)

    Turn the ignition switch to “ON”.

    Subaru Forester. Type B multi-function display (color LCD)

    Press the Subaru Forester. Type B multi-function display (color LCD) button. Select “Settings”. Select “Vehicle”. Select “Time/Date” and then select “Manual”.

    Subaru Forester. Type B multi-function display (color LCD)

    Set the each items plus and minus. Select Subaru Forester. Type B multi-function display (color LCD) to complete the clock setting.

    read more

     
    Copyright © 2026 www.suforester5.com