Subaru Forester: Power seat (if equipped) / Driver’s seat

- Seat position forward/backward control
switch
To adjust the seat forward or backward,
move the control switch forward or backward. During forward/backward
adjustment
of the seat, the seat cushion
angle or height cannot be adjusted.
- Seat cushion angle control switch
To adjust the seat cushion
angle, pull up
or push down the front end of the control
switch.
- Seat height control switch
To adjust the seat height, pull up
or push
down the rear end of the control switch.
- Seatback angle (reclining) control switch
To adjust the angle
of the seatback, move
the control switch.
- Lumbar support control switch
To increase lower back support,
push the
front side of the switch. To decrease
lower back support, push the rear side of
the switch.
Seat position forward/backward control switchTo adjust the
seat forward or backward,
move the control switch forward or
backward.
Seat cushion angle control switchTo adjust the seat cushion
angle, pull up
or push down the front end of the control
switch...
Other information:
Right-hand side
Use a screwdriver to remove the clips
on the air intake duct, then remove the
duct.
Left-hand side
Use a screwdriver to remove the
secured clip of the washer tank. To make
it easy to access the bulb, turn the neck of
the washer fluid filler pipe as illustrated...
After stopping the engine and any door
including the rear gate is opened, the
steering wheel will be locked due to the
steering lock function.
When the engine is restarted, the steering
lock will be automatically released.
When the steering lock cannot be
released
Operation indicator
Push-button ignition switch
When you cannot restart the engine due to
the steering lock, check the status of
operation indicator and perform the following
steps...