Subaru Forester: Power seat (if equipped) / Front passenger’s seat

- Seat position forward/backward control switch
To adjust the
seat forward or backward,
move the control switch forward or
backward.
- Seat cushion angle control switch
To adjust the seat cushion
angle, pull up
or push down the front end of the control
switch.
- Seat height control switch
To adjust the seat height, pull up
or push
down the rear end of the control switch.
- Seatback angle (reclining) control switch
To adjust the angle
of the seatback, move
the control switch.
WARNING
To avoid loss of vehicle control or
personal injury, never perform
the following operations while
driving.
Adjusting the seat
Retrieving the seat position
Before adjusting the seat, make
sure that cargo or the hands and
feet of rear seat passengers are
clear of the adj..
Other information:
Press the AUTO button. The indicator
light “FULL AUTO” on the multi-function
display (color LCD) illuminates.
Set the preferred temperature using
the temperature control dial.
NOTE
If you operate any of the buttons on the
control panel other than the ON/OFF
button, the rear window defogger button,
the SYNC button (if equipped) and
the temperature control dial(s) during
FULL AUTO mode operation, the
“FULL” indicator light on the control
panel will turn off and the “AUTO”
indicator light will remain illuminated...
Remove loose dirt, dust or debris with a
vacuum cleaner. If the dirt is caked on the
fabric or hard to remove with a vacuum
cleaner, use a soft brush then vacuum it.
Wipe the fabric surface with a tightly wrung
cloth and dry the seat fabric thoroughly...