Kia Telluride (LQ2, 2027-2026) Owner's Manual / Driver assistance guide / Lane Keeping Assist (LKA) / Lane Keeping Assist settings

Subaru Forester: Lane Keeping Assist (LKA) / Lane Keeping Assist settings

Lane Safety


	Driver Assistance Driving Safety Lane Safety

While the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Driving Safety on the infotainment screen to configure the Lane Safety settings.

Lane Safety: When the system detects that your Kia Telluride is about to leave its lane unintentionally, it can provide steering assistance to help keep the vehicle within the lane boundaries. If the vehicle crosses a lane marking, the system also issues an audible alert together with steering wheel vibration. If Lane Safety is deselected, the Lane Safety indicator () turns OFF.

WARNING

Even when Lane Safety is disabled, the driver remains fully responsible for monitoring road conditions, maintaining proper lane position, and steering the vehicle safely at all times.

NOTE

If you press and hold the Lane Driving Assist button () for more than two seconds to switch off Lane Keeping Assist, the Lane Safety setting is also turned off.

The Lane Keeping Assist setting is retained even after the engine is turned off and restarted, so it will return to the previously selected state.

CAUTION

Towing a trailer or installing a cargo carrier may affect vehicle stability. If necessary, disable the function and operate your Kia Telluride with additional caution.

Do not rely on the system while towing another vehicle or when equipment that could influence sensor performance or vehicle balance is installed, as proper operation cannot be guaranteed.

When a trailer or carrier is connected, configure the trailer or carrier menu if available. Whether the connection is detected automatically using genuine Kia equipment or selected manually by the driver, certain driver assistance functions may become limited. Refer to the Driver Assistance System limitations and always drive carefully.

TIP

Pressing the Lane Driving Assist button () switches OFF Lane Keeping Assist and disables the Lane Safety function.

Warning Methods


	Driver Assistance Warning Methods

To customize the Warning Methods while the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Warning Methods on the infotainment display. The following options are available:

Warning Volume: Adjusts the loudness of the audible driver assistance alerts.
Haptic Warning: Turns ON steering wheel vibration notifications.
Lane Safety Warning Sound: Allows the Lane Safety warning sound to be turned OFF when Haptic Warning is ON.
Driving Safety Priority: Automatically lowers the volume of other audio sources whenever a Driving Safety warning is issued.

TIP

The selected Warning Methods may also be shared by other driver assistance features installed on your Kia Telluride.

Your chosen Warning Methods are saved and remain in effect after the vehicle is turned OFF and restarted.

Depending on the vehicle specification, the Warning Methods menu may not be available.

The Lane Safety Warning Sound can only be configured when both Warning Volume and Haptic Warning are enabled.

Lane Keeping Assist (LKA)

W..

Lane Keeping Assist operation

Turning Lane Keeping Assist ON and OFF To switch Lane Keeping Assist ON or OFF, press and hold the Lane Driving Assist () button on the steering wheel for more than two seconds while the vehicle is ON...

Other information:

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Consumer Assistance (U.S. only)

Comprehensive Roadside Assistance coverage is automatically provided with all new, current model year Kia Telluride vehicles starting from the exact date the vehicle is delivered to its first retail buyer or otherwise put into service (known as the in-service date), whichever occurs earlier, for a continuous duration of 60 months or 60,000 miles, whichever comes first, subject to all terms, standard conditions, and exclusions set forth in the official Kia Warranty and Consumer Information Manual applicable to your specific vehicle model year...

Subaru Forester 2019-2026 Owners Manual: Rear Cross Traffic Alert (RCTA)

Operating range The system notifies the driver of another vehicle approaching from either side when driving in reverse. This feature helps the driver check the rear and side areas of the vehicle when moving backward. If the system detects a vehicle approaching from either side while moving backward, it warns the driver of dangers in the following way...

Outside temperature indicator

The outside temperature is displayed on the multi-function display (color LCD).

NOTE

The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.