Subaru Forester: Operation during cold weather / Opening rear gate (models with power rear gate)
CAUTION
Before operating the power rear
gate, check that there is no frost or
snow between the power rear gate
and the vehicle body. If you notice
frost or snow etc. on the power rear
gate, remove it. If you forcibly operate
the power rear gate with frost or
snow, it may cause a malfunction.
To help prevent moisture from forming in
the fuel system and the risk of its freezing,
use of an antifreeze additive in the fuel
tank is recommended during cold weather.
Use only additives that are specifically
designed for this purpose. When an antifreeze
additive is used, its effect lasts
l..
To prevent skidding and slipping, avoid
sudden braking, abrupt acceleration, highspeed
driving, and sharp turning when
driving on snowy or icy roads...
Other information:
Release the parking brake and put the
transmission in the neutral position.
The ignition switch should be in the
“ON” position while the vehicle is being
towed.
Take up slack in the towline slowly to
prevent damage to the vehicle.
WARNING
Never turn the ignition switch to
the “LOCK”/“OFF” position while
the vehicle is being towed because
the steering wheel and the
direction of the wheels will be
locked...
Operation indicator
Push-button ignition switch
The power is switched every time the
push-button ignition switch is pressed.
Carry the access key fob, and sit in the
driver’s seat.
Shift the select lever into the “P”/“N”
position...