Subaru Forester 2019-2026 Owners Manual / Driving tips / Winter driving / Operation during cold weather / Refueling in cold weather
Subaru Forester: Operation during cold weather / Refueling in cold weather
To help prevent moisture from forming in the fuel system and the risk of its freezing, use of an antifreeze additive in the fuel tank is recommended during cold weather. Use only additives that are specifically designed for this purpose. When an antifreeze additive is used, its effect lasts longer if the tank is refilled whenever the fuel level reaches half empty.
If your SUBARU is not going to be used for an extended period, it is best to have the fuel tank filled to capacity.
Parking in cold weather
WARNING
Snow can trap dangerous exhaust
gases under your vehicle. K..
Opening rear gate (models with power rear gate)
CAUTION
Before operating the power rear
gate, check that there is no frost or
snow between the power rear gate
and the vehicle body. If you notice
frost or snow etc...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Drive mode integrated control system. DRIVE MODE
The drive mode integrated control system in the Kia Telluride allows the driver to choose a driving mode that best matches current road conditions, the surrounding environment, or personal driving preference. DRIVE MODE You can select a suitable drive mode based on your preferred driving feel or the condition of the road ahead...
Subaru Forester 2019-2026 Owners Manual: Vehicle Dynamics Control operation indicator light
The indicator light flashes during activation of the skid suppression function and during activation of the traction control function. NOTE The light may remain illuminated for a short period of time after the engine has been started, especially in cold weather...
Categories
- Manuals Home
- Replacing battery of access key fob
- Unlock using PIN Code Access
- Vehicle load limit – how to determine
- New on site
- Most important about car
Type B multi-function display (color LCD)
Turn the ignition switch to “ON”.
button.
Select “Settings”.
Select “Vehicle”.
Select “Time/Date” and then select “Manual”.
to complete the
clock
setting.
Copyright © 2026 www.suforester5.com