Subaru Forester: Displaying the Auto Start Stop system status / System warning / System warning
So that it can be used safely and comfortably, the Auto Start Stop system is designed to constantly monitor the vehicle conditions as well as the environment inside and outside the vehicle in addition to driver operations, and to provide various warnings to the driver via the warning light and/or indicator light illuminating or flashing and a buzzer sounding. For details about the warning light and indicator light, refer to “Auto Start Stop warning light/Auto Start Stop OFF indicator light (yellow)”.
Warning buzzer
The buzzer will sound when the engine hood is opened while the engine is stopped by the Auto Start Stop system. When this occurs, the buzzer will stop sounding when the following operations are performed.
The engine is restarted by normal operation. (Refer to “Preparing to drive”.)
The ignition switch is turned to the “LOCK”/“OFF” position.
Display of warning messages (models with combination meter display (color LCD))
If a warning message is displayed on the combination meter display (color LCD) while driving, a malfunction may have occurred in the Auto Start Stop system. In this case, the Auto Start Stop warning light will illuminate or flash in yellow. We recommend that you have your vehicle inspected at a SUBARU dealer as soon as possible.
Displaying the Auto Start Stop system status
Approximate indications of the time that
the engine has been stoppe..
Hill start assist system
WARNING
The Hill start assist system is a
device only for helping the driver
to START the vehicle on an uphill
grade. To prevent accidents
when the vehicle is parked on a
slope, be sure to firmly set the
parking brake...
Other information:
Subaru Forester 2019-2021 Owners Manual: Steps for Determining Correct Load Limit
Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s placard. Determine the combined weight of the driver and passengers that will be riding in your vehicle. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs...
Subaru Forester 2019-2021 Owners Manual: Alarm system operation
When the alarm system is armed, it is triggered by the opening any of the doors, the rear gate or engine hood. The alarm system will activate the following alarms when triggered. The vehicle’s horn will sound for 30 seconds. The hazard warning flashers will flash for 30 seconds...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Clearing the registered seat position with access key fob
- Intelligent (I) mode
- How to change the information display
- New on site
- Most important about car
Type B multi-function display (color LCD)
Turn the ignition switch to “ON”.
button.
Select “Settings”.
Select “Vehicle”.
Select “Time/Date” and then select “Manual”.
to complete the
clock
setting.
