Subaru Forester 2019-2025 Owners Manual / Instruments and controls / Warning and indicator / Brake system warning light (red) / Vacuum pressure system warning
Subaru Forester: Brake system warning light (red) / Vacuum pressure system warning
The brake system warning light 
will
illuminate when the vacuum pressure
sensor is malfunctioning or brake booster
pressure is decreasing.
If the brake warning light continues to illuminate for several minutes after starting the engine, there may be a malfunction in the vacuum system. In this case, drive the vehicle carefully and have the system inspected by a SUBARU dealer.
Electronic Brake Force Distribution (EBD) system warning
If the warning light remains on even though
the parking brake is re..
Other information:
Subaru Forester 2019-2025 Owners Manual: When the vehicle is parked on level ground
Roof rails Roof crossbars Roof tent Occupants in the roof tent The total weight on the roof rails – including the roof crossbars, roof tent, and all occupants and contents in the roof tent – must not exceed either the vehicle’s roof rail load limit (700 lbs (317 kg)), evenly distributed, or the load limit of the roof crossbars, whichever is lower...
Subaru Forester 2019-2025 Owners Manual: Windshield wiper blade assembly
Raise the wiper arm off the windshield. CAUTION Hold the wiper arm when replacing the wiper blade. Holding the wiper blade, may result in blade deformation. Lock knob Hold the wiper blade connection by hand, push the lock knob to release the lock, and then pull out the wiper blade assembly...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Daytime running light system
- RAB warning light (if equipped)
- If the passenger’s frontal airbag OFF indicator illuminates and the ON indicator turns off even when the front passenger’s seat is occupied by an adult
- New on site
- Most important about car
Type B multi-function display (color LCD)
Turn the ignition switch to “ON”.
button.
Select “Settings”.
Select “Vehicle”.
Select “Time/Date” and then select “Manual”.
to complete the
clock
setting.
Copyright © 2025 www.suforester5.com