Subaru Forester: Warning and indicator / Electronic parking brake light
![Subaru Forester. Electronic parking brake light](images/electronic_parking_brake_light-1696/1480/subaru_forester_electronic_parking_brake_light_365.gif)
The brake system warning light
will
illuminate when the vacuum pressure
sensor is malfunctioning or brake booster
pressure is decreasing.
If the brake warning light continues to
illuminate for several minutes after starting
the engine, there may be a malfunction in
the vacuum system. In this..
The light illuminates with the parking brake
applied while the ignition switch is in the
“ON” position. It turns off when the parking
brake is fully released...
Other information:
WARNING
To avoid loss of vehicle control or
personal injury, never perform
the following operations while
driving.
Adjusting the seat
Retrieving the seat position
Before adjusting the seat, make
sure that cargo or the hands and
feet of rear seat passengers are
clear of the adjusting mechanism...
Press the AUTO button. The indicator
light “FULL AUTO” on the multi-function
display (color LCD) illuminates.
Set the preferred temperature using
the temperature control dial.
NOTE
If you operate any of the buttons on the
control panel other than the ON/OFF
button, the rear window defogger button,
the SYNC button (if equipped) and
the temperature control dial(s) during
FULL AUTO mode operation, the
“FULL” indicator light on the control
panel will turn off and the “AUTO”
indicator light will remain illuminated...