Subaru Forester: Electronic parking brake light / Electronic parking brake system warning

WARNING

  • When you release the electronic parking brake while the engine is running, the electronic parking brake indicator light will turn off. However, if the light still illuminates, stop the vehicle in a safe place immediately and have the system inspected by a SUBARU dealer.
  • If at all in doubt about whether the brakes are operating properly, do not drive the vehicle. Have your vehicle towed to the nearest SUBARU dealer for repair.
  • If the electronic parking brake indicator light flashes, the electronic parking brake system may be malfunctioning. Immediately stop your vehicle in a safe location, use tire stops under the tires to prevent the vehicle from moving and contact your SUBARU dealer. For details, refer to “Electronic parking brake”.

NOTE

  • When the ignition switch is turned to the “LOCK”/“OFF” position with the electronic parking brake applied, the electronic parking brake indicator light remains illuminated for approximately 30 seconds and then turns off.
  • When the electronic parking brake switch is pulled to apply the electronic parking brake while the ignition switch is in the “LOCK”/“OFF” position, the electronic parking brake indicator light illuminates, remains illuminated for approximately 30 seconds and then turns off.
  • Even if the electronic parking brake indicator light flashes, if the warning light behavior is as described in the following examples, the electronic parking brake system is not malfunctioning.
    • The indicator light turns off when the electronic parking brake is released.
  • The electronic parking brake indicator light may flash immediately after the engine is started. However, it is not malfunctioning if the indicator light turns off after the electronic parking brake is released.
  • The electronic parking brake indicator light may flash after the electronic parking brake is frequently applied and released. However, the electronic parking brake system is not malfunctioning if the light turns off for a short period of time.

The electronic parking brake indicator light flashes when the electronic parking brake system is malfunctioning. If the indicator light flashes, promptly park in a safe location as soon as possible and contact your SUBARU dealer.

The electronic parking brake indicator light remains illuminated when the parking brake cannot be released even if the parking brake switch is pushed. For details, refer to “Electronic parking brake”.

Parking brake apply inhibit warning

The electronic parking brake indicator light flashes for 10 seconds and a chirp sound will be heard if the parking brake switch is operated when the parking brake cannot be applied.

Frequent operation warning

The electronic parking brake indicator light flashes for 10 seconds and a chirp sound will be heard if the parking brake switch is operated too frequently. In this case, the operation of the parking brake switch is restricted to protect the electronic parking brake system.

NOTE

Wait until the indicator light turns off.

    Parking brake indicator

    T..

    Auto Vehicle Hold ON indicator light

    CAUTION If the Auto Vehicle Hold ON indicator light does not illuminate even when the Auto Vehicle Hold switch is pressed to activate the Auto Vehicle Hold function, the electronic parking brake system may be malfunctioning...

    Other information:

    Kia Telluride (LQ2, 2027-2026) Owner's Manual: Curtain air bag


    The curtain air bags are installed along both roof rails above the front and rear doors of the Kia Telluride. Their purpose is to help protect occupants seated next to the side windows during certain side impacts and rollover events. Curtain air bag The actual curtain air bag modules installed in your vehicle may differ slightly from those shown in the illustration...

    Subaru Forester 2019-2026 Owners Manual: Average fuel consumption


    Displays the driving range per gallon of fuel Displays the driving range per liter of fuel Displays the fuel consumption per 100 km This display shows the average rate of fuel consumption since the trip meter was last reset. TRIP RESET switch Press the TRIP RESET switch to switch between the displays for the average fuel consumption that corresponds to the A trip meter mileage and the average fuel consumption that corresponds to the B trip meter mileage...

    Categories

    Windshield wiper and washer switches

    The wiper operates only when the ignition switch is in the “ON” or “ACC” position.

    read more

     
    Copyright © 2026 www.suforester5.com