Subaru Forester: Warning and indicator / Windshield washer fluid warning light

This light illuminates when the fluid level in
the windshield washer fluid tank decreases
to the lower limit (approximately
0.6 US qt, 0.6 liter, 0.5 Imp qt).
If this light illuminates when the engine is
running, it may indicate that the transmission
fluid temperature is too hot.
If the light illuminates while driving, immediately
stop the vehicle in a safe place
and let the engine idle until the warning
light turns off...
Other information:
The hazard warning flasher should be
used in day or night to warn other drivers
when you have to park your vehicle under
emergency conditions.
Avoid stopping on the road. It is best to
safely pull off the road if a problem occurs.
The hazard warning flasher can be activated
regardless of the ignition switch
position...
WARNING
Only use a four-wheel dynamometer
when testing an All-Wheel Drive
model.
Testing of an AWD model must
NEVER be performed on a single
two-wheel dynamometer. Attempting
to do so will result in uncontrolled
vehicle movement and may
cause an accident or injuries to
persons nearby...