Subaru Forester: Tires and wheels / Checking tire inflation pressure

Routinely checking inflation pressure at least once a month—or prior to taking long road trips—is essential for maintaining optimal safety and handling performance in your Kia Telluride.

Always rely on a high-quality, calibrated tire pressure gauge when performing routine maintenance checks. Relying solely on a visual inspection can be misleading, as modern radial tires often appear properly inflated even when operating below critical air pressure thresholds.

Accurate cold tire inflation pressure readings must be taken when the vehicle has been parked for at least 3 hours or driven for less than 1 mile (1.6 km) at low speeds.

1. Unscrew and remove the protective valve cap from the wheel's tire valve stem.
2. Firmly press the tire pressure gauge onto the exposed valve stem to establish a tight seal and obtain an accurate measurement. If the cold inflation pressure aligns with the factory specification listed on the tire and loading information label, no additional air adjustment is needed.
3. If the measured reading falls below recommended specifications, introduce compressed air gradually until the target pressure level is restored.
4. Should you accidentally overinflate the tire, carefully release excess pressure by depressing the metal valve pin located in the center of the valve stem.
5. Recheck the internal pressure with your gauge to verify that the tire accurately matches the target specification.
6. Firmly reinstall the valve caps onto all valve stems upon completion. Secure valve caps serve as a crucial seal to protect sensitive inner valve cores from dirt, road grime, and moisture ingress that could trigger slow air leaks.

   Frequently inspect all four tires on your Kia Telluride for proper inflation stability, signs of premature treadwear, and hidden structural damage, always using an accurate pressure gauge.

   Operating a vehicle on tires with excessive or insufficient air pressure leads to irregular treadwear, compromised vehicle stability, and reduced cornering control. Extreme pressure deviations dramatically increase the risk of sudden tire blowouts, which can lead to a loss of vehicle control, major accidents, severe injuries, or fatal collisions. The manufacturer's recommended cold tire pressure for your Kia Telluride is clearly detailed in this manual and printed on the official tire placard located on the driver-side center pillar (B-pillar).