Kia Telluride (LQ2, 2027-2026) Owner's Manual / Maintenance / Tires and wheels

Subaru Forester: Maintenance / Tires and wheels

Tire care

Proper tire maintenance is vital to ensure maximum driving safety, optimal vehicle handling, extended tread life, and peak fuel efficiency for your Kia Telluride. To achieve these results, you must consistently monitor cold tire inflation levels, adhere strictly to recommended pressure specifications, and stay within the designated vehicle load capacity and weight distribution limits.

Recommended cold tire inflation pressures

Factory specification details regarding recommended tire sizes and corresponding cold inflation pressures are printed directly on the tire information placard attached to the driver-side center pillar (B-pillar).

Neglecting to maintain proper tire inflation can cause uneven or premature tread wear, compromise vehicle cornering stability, degrade fuel economy, and increase the risk of wheel rim deformation. Furthermore, improper pressure leads to harsh ride quality, heightened vulnerability to road hazard damage, and severe risk of sudden tire blowouts.

WARNING

Tire underinflation

Inflate your tires according to the precise technical instructions provided in this manual. Check tire inflation pressure routinely with an accurate gauge at least twice a month and always prior to setting out on long-distance trips. Operating your Kia Telluride on underinflated tires compromises overall directional stability and severely overheats internal tire components. Overheating can lead to sudden structural degradation, tread separation, and catastrophic tire failure resulting in loss of control, severe injury, or fatal accidents. This danger escalates significantly during hot summer weather or extended periods of sustained high-speed highway driving.

TIP

Always inspect and measure inflation levels when tires are completely cold—meaning the vehicle has been parked in the shade for at least 3 hours or has been driven less than 1 mile (1.6 km) at low speed.

Maintaining correct cold inflation pressures guarantees optimal suspension dampening, crisp steering responsiveness, balanced braking performance, and minimal tread wear across all four wheels.

For complete details on factory pressure ratings and tire dimensions, consult the official Tires and wheels specification section.

Tire pressure

Adhere to these essential maintenance practices at all times:

Measure tire pressure exclusively when the tires are cold (allowing the vehicle to sit stationary for a minimum of 3 hours or driving under 1 mile / 1.6 km after starting).
Check the pressure of the spare tire simultaneously whenever inspecting the main road tires, ensuring it remains fully inflated and ready for emergency deployment: (if equipped)
Never exceed the Gross Vehicle Weight Rating (GVWR) of your Kia Telluride. Exercise careful judgment not to overload the interior cargo area or roof luggage rack: (if equipped)
Tires naturally warm up during operation, causing internal pressure to rise approximately 4–6 psi (28–41 kPa) above recommended cold baseline levels. Never bleed or vent air from warm tires to adjust pressure readings, as doing so leaves them dangerously underinflated once they cool down.

WARNING

Tire inflation

Both severe overinflation and underinflation significantly shorten overall tread lifespan, negatively alter steering dynamics, and trigger sudden structural tire failures. Operating under these conditions increases the likelihood of losing vehicle control, raising the risk of serious personal injury.

12V parking lithium battery: (if equipped)

Certain configurations of the Kia Telluride feature a specialized auxiliary 12V parking lithium battery. This additional power unit delivers a constant and stable electrical supply to support background functions while parked, including Over-The-Air (OTA) system software updates, the automatic A/C d..

Tire terminology and definitions

Refer to the following list for detailed definitions and technical explanations of key automotive terms found in tire descriptions and manual specifications for your Kia Telluride: Air Pressure The total force of compressed air inside the tire structure pushing outward agains..

Other information:

Subaru Forester 2019-2026 Owners Manual: Air conditioner control

The air conditioner operates only when the engine is running. Press the air conditioner button while the fan is in operation to turn on the air conditioner. When the air conditioner is on, the “A/C” indicator light illuminates. To turn off the air conditioner, press the button again...

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Vehicle Stability Management (VSM)

The Vehicle Stability Management (VSM) system is designed to further enhance the stability and steering performance of the Kia Telluride in situations where additional assistance may be beneficial. It works together with other vehicle control systems to help maintain predictable handling under changing road conditions...

Average fuel consumption

Subaru Forester. Average fuel consumption

Displays the driving range per gallon of fuel Displays the driving range per liter of fuel Displays the fuel consumption per 100 km

This display shows the average rate of fuel consumption since the trip meter was last reset.