Subaru Forester: Warning and indicator / Depress brake indicator light (if equipped)

This light illuminates if the brake pedal is
not depressed in the following conditions.
- The Auto Vehicle Hold switch is
pressed to deactivate the Auto Vehicle
Hold function while the vehicle is stopped
by the Auto Vehicle Hold function.
- The electronic parking brake is released.
The low fuel warning light illuminates when
the tank is nearly empty, at approximately
2.5 US gal (9.5 liters, 2.1 Imp gal). It only
operates when the ignition switch is in the
“ON” position...
Other information:
Seat position memory switch
Power rear gate button
Steering Responsive Headlight OFF
switch
Memory switch
Illumination brightness control dial
Combination meter
Type A multi-function display (black and
white) (page 202)/Type B multi-function
display (color LCD)
Audio*
Hazard warning flasher switch
Climate control panel
Tilt/Telescopic steering wheel
Driver Monitoring System OFF switch
Fuse box
BSD/RCTA OFF switch (page 362)
Auto Start Stop OFF switch
Hood release knob
Vehicle Dynamics Control OFF switch
*: For details about how to use the audio and
navigation system (if equipped), refer to the
separate navigation/audio Owner’s Manual...
Apply a flat-head screwdriver to the
light cover as shown in the illustration, and
pry the light cover off from the rear gate
trim.
Turn the bulb socket counterclockwise
and remove it.
Pull the bulb out of the bulb socket and
replace it.
Install the bulb socket by turning it
clockwise...