Subaru Forester: Warning and indicator / Door open warning light

The warning light illuminates if any door or
the rear gate is not fully closed. This
function is effective even if the ignition
switch is in the “LOCK”/“OFF” or “ACC”
position, or the key is removed from the
ignition switch.
For some models, only the open doors are
indicated by the warning lights.
Always make sure this light is not illuminated
before you start to drive.
The warning light illuminates if the engine
hood is not fully closed. This function is
effective even if the ignition switch is in the
“LOCK”/“OFF” or “ACC” position, or the
key is removed from the ignition switch...
Other information:
WARNING
Be sure to press the correct button
to retrieve your registered seat position.
If the seat position is not
optimum for you, it may adversely affect your driving and may reduce
the effectiveness of the seatbelt.
That could result in an accident
involving serious injury or death...
Press the AUTO button. The indicator
light “FULL AUTO” on the multi-function
display (color LCD) illuminates.
Set the preferred temperature using
the temperature control dial.
NOTE
If you operate any of the buttons on the
control panel other than the ON/OFF
button, the rear window defogger button,
the SYNC button (if equipped) and
the temperature control dial(s) during
FULL AUTO mode operation, the
“FULL” indicator light on the control
panel will turn off and the “AUTO”
indicator light will remain illuminated...