Subaru Forester 2019-2025 Owners Manual / Seat, seatbelt and SRS airbags / SRS airbag (Supplemental Restraint System airbag) / Example of accident in which the driver’s/driver’s and front passenger’s SRS frontal airbag(s) will most likely deploy

Subaru Forester: SRS airbag (Supplemental Restraint System airbag) / Example of accident in which the driver’s/driver’s and front passenger’s SRS frontal airbag(s) will most likely deploy

Subaru Forester. frontal airbag(s) will most likely deploy

A head-on collision against a thick concrete wall at a vehicle speed of 12 to 19 mph (20 to 30 km/h) or higher activates only the driver’s SRS frontal airbag or both driver’s and front passenger’s SRS frontal airbags. The airbag(s) will also be activated when the vehicle is exposed to a frontal impact similar in fashion and magnitude to the collision described above.

    Example of the type of accident

    T..

    Examples of the types of accidents in which it is possible that the driver’s/driver’s and front passenger’s SRS frontal airbag(s) will deploy

    Only the driver’s SRS frontal airbag or both driver’s and front passenger’s SRS frontal airbags may be activated when the vehicle sustains a hard impact in the undercarriage area from the road surface (such as when the vehicle plunges into a deep ditch, is severely impacted or knocked h..

    Other information:

    Subaru Forester 2019-2025 Owners Manual: Canceling the Reverse Automatic Braking (RAB) system operation


    The Reverse Automatic Braking (RAB) system can be temporarily canceled by any of the following operations. Depressing the brake pedal* Depressing the accelerator pedal* The accelerator pedal is kept depressed. (In this case, limited acceleration will be canceled and the vehicle will continue reversing...

    Subaru Forester 2019-2025 Owners Manual: How to temporarily lower the sensitivity of the high beam assist function


    The sensitivity of the high beam assist function can be lowered by performing the following operations. Before turning the ignition switch to the “ON” position, set the light control switch to the “AUTO” position and push the signal lever forward (high beam position)...

    Categories

    Driving information display

    NOTE

    You can set the units for both the multifunction display (black and white) and the combination meter at the same time. For details about setting the language and units, refer to “Type A combination meter” or “Menu screens”.

    read more

     
    Copyright © 2025 www.suforester5.com