Subaru Forester: Starting and operating / Fuel
CAUTION
- Use of a fuel which is low in
quality or use of an inappropriate
fuel additive may cause damage
to the engine and/or fuel system.
- Some gas stations, particularly
those in high altitude areas, offer
fuels posted as regular octane
gasoline with an octane rating
below 87 AKI (90 RON). Use of
those fuels is not recommended.
The engine is designed to operate using
unleaded gasoline with an octane rating
of 87 AKI (90 RON) or higher.
Mexico only
Add a bottle of genuine SUBARU fuel
additive to the fuel every 9,000 miles
(15,000 km)...
Other information:
By operating the “” or “”
switch on the
steering wheel, you can change the screen
that is always displayed.
Average fuel consumption screen:
: Average fuel consumption
: Driving range on remaining
fuel
This screen displays the average rate of
fuel consumption since the trip meter was
last reset...
Press the “RES/SET” switch to the “SET”
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
When setting the displayed unit as
“MPH”:
The set speed can be decreased 1 mph
(1...
Categories
The outside temperature is displayed on
the multi-function display (color LCD).
NOTE
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following conditions.
While parking or driving at low
speeds
When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
When starting the engine after
being parked for a certain period of
time
The temperature unit cannot be
changed.
read more