Subaru Forester 2019-2024 Owners Manual / Seat, seatbelt and SRS airbags / SRS airbag (Supplemental Restraint System airbag) / If the front passenger’s frontal airbag ON indicator illuminates and the OFF indicator turns off even when an infant or a small child is in a child restraint system (including booster seat)

Subaru Forester: SRS airbag (Supplemental Restraint System airbag) / If the front passenger’s frontal airbag ON indicator illuminates and the OFF indicator turns off even when an infant or a small child is in a child restraint system (including booster seat)

Subaru Forester. system (including booster seat)

Subaru Forester. system (including booster seat) Front passenger’s frontal airbag ON indicator

Subaru Forester. system (including booster seat) Front passenger’s frontal airbag OFF indicator

  1. Turn the ignition switch to the “LOCK”/ “OFF” position.
  2. Remove the child restraint system from the seat.
  3. By referring to the child restraint manufacturer’s recommendations as well as the child restraint system installation procedures in “Child restraint systems, correctly install the child restraint system.
  4. Turn the ignition switch to the “ON” position and make sure that the front passenger’s frontal airbag ON indicator turns off and the OFF indicator illuminates.

If the ON indicator still remains illuminated while the OFF indicator turns off, take the following actions.

  • Ensure that no article is placed on the seat other than the child restraint system and the child occupant.
  • Ensure that the backward-forward position and seatback of the front passenger’s seat are locked into place securely by moving the seat back and forth.

If the ON indicator still remains illuminated while the OFF indicator turns off after taking the relevant corrective actions described above, relocate the child restraint system to the rear seat and immediately contact your SUBARU dealer for an inspection.

NOTE

  • When a child who has outgrown a child restraint system or a small adult is seated in the front passenger’s seat, the SUBARU advanced frontal airbag system may or may not activate the front passenger’s SRS frontal airbag depending on the occupant’s seating posture. Children should always wear a seatbelt when sitting in the seat irrespective of whether the airbag is deactivated or activated. If the front passenger’s SRS frontal airbag is activated (the ON indicator remains illuminated while the OFF indicator turns off), take the following action.
  • Ensure that no article is placed on the seat other than the occupant.

    If the ON indicator still remains illuminated while the OFF indicator turns off despite the fact that the actions noted above have been taken, seat the child/ small adult in the rear seat and immediately contact your SUBARU dealer for an inspection. Even if the system has passed the dealer inspection, it is recommended that on subsequent trips the child/small adult always take the rear seat.

Children who have outgrown a child restraint system should always wear the seatbelt irrespective of whether the airbag is deactivated or activated.

    Conditions in which front passenger’s SRS frontal airbag is not activated

    T..

    Conditions in which front passenger’s SRS frontal airbag is activated

    The front passenger’s SRS frontal airbag will be activated for deployment upon impact when any of the following conditions are met regarding the front passenger’s seat...

    Other information:

    Subaru Forester 2019-2024 Owners Manual: Seatbelt with shoulder belt and lap belt pretensioners


    NOTE This section is applicable to the front seatbelt. Seatbelt retractor assembly (shoulder belt pretensioner and adaptive force limiter) Lap belt pretensioner The shoulder belt pretensioner is supplemented by a lap belt pretensioner, which is located at the base of the center pillar...

    Subaru Forester 2019-2024 Owners Manual: Fuses


    CAUTION Never replace a fuse with one having a higher rating or with material other than a fuse because serious damage or a fire could result. The fuses are designed to melt during an overload to prevent damage to the wiring harness and electrical equipment...

    Categories

    Windshield wiper and washer switches

    The wiper operates only when the ignition switch is in the “ON” or “ACC” position.

    read more

     
    Copyright © 2024 www.suforester5.com