Subaru Forester: Power window operation / Locking the passengers’ windows

- Lock
- Unlock
The lock switch is in the lock position, the
rear windows cannot be operated by the
driver’s side switches. The passenger’s
side switches and the rear seat side
switches are not operational either.
When the indicator on the window
switches does not illuminate, the window
switch cannot be operated.
If the one-touch auto up and down function
or off delay function does not operate
properly, operate each window according
to the following procedure in order to
initialize the power window system...
Other information:
The hill descent control function will be in
standby mode when the X-MODE is
activated and the vehicle speed is less
than approximately 12 mph (20 km/h).
The function will operate when the vehicle
speed is less than approximately 12 mph
(20 km/h) and the accelerator ratio is less
than approximately 10%...
Park the vehicle on a level surface and
turn the ignition switch to the “LOCK”/
“OFF” position. If you check the oil level
just after turning the ignition switch to the
“LOCK”/“OFF” position, wait for at least 5
minutes for the oil to drain back into the oil
pan before checking the level...