Subaru Forester 2019-2026 Owners Manual / Keys and doors
Subaru Forester: Keys and doors
- Keys
- Keyless access with push-button start system (if equipped)
- Safety precautions
- Locking and unlocking by holding the access key fob
- Unlock using PIN Code Access
- Power saving function
- Power saving function of access key fob
- Disabling keyless access function
- Selecting audible signal operation
- When access key fob does not operate
- Certification for keyless access with push-button start system
- Immobilizer
- Remote keyless entry system
- Locking and Unlocking the doors
- Vehicle finder function. Sounding a panic alarm
- Setting audible signal operation (models without “keyless access with push-button start system”)
- Replacing lost transmitters. Certification for remote keyless entry system
- Door locks
- Locking and unlocking from the outside
- Locking and unlocking from the inside
- Automatic door locking/unlocking
- Key lock-in prevention function
- Battery drainage prevention function
- Alarm system
- Alarm system operation
- Arming the system
- Disarming the system
- Alarm system setting
- If you have accidentally triggered the alarm system. Valet mode
- Child safety locks
- Windows
- Rear gate
- Manual rear gate
- Power rear gate (if equipped)
- Operation
- Memory function
- Reverse function
- Rear gate drop prevention function
- Selecting audible signal operation
- Initialization of power rear gate
- Moonroof (if equipped)
Keys
NOTE
For models with “keyless access with
push-button start system”, refer to
“Keyless access with push-button start
system”.
The following keys are provided with the
vehicle...
Other information:
Subaru Forester 2019-2026 Owners Manual: Certification for the BSD/RCTA
U.S.-spec. models FCC ID: OAYSRR3A CAUTION FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This device complies with part 15 of the FCC Rules...
Subaru Forester 2019-2026 Owners Manual: Registration of memory position with button “1” or “2”
Adjust the seat position under the following conditions. The parking brake is applied. The ignition switch is in the “ON” position. The select lever is in the “P” position. Press and hold the “SET” button, then press button “1” or “2” to register the seat position and outside mirror angle...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Vehicle load limit – how to determine
- Reclining the seatback (if equipped)
- To activate/deactivate the X-MODE
- New on site
- Most important about car
Driving information display
NOTE
You can set the units for both the multifunction display (black and white) and the combination meter at the same time. For details about setting the language and units, refer to “Type A combination meter” or “Menu screens”.
Copyright © 2026 www.suforester5.com