Subaru Forester: Keyless access with push-button start system (if equipped) / Selecting audible signal operation
Using an electronic chirp, the system will give you an audible signal when the doors lock and unlock. If desired, you may turn the audible signal off. For more details, contact a SUBARU dealer.
NOTE
The setting can be changed by operating the combination meter display (color LCD). For details, refer to “Vehicle Setting”.
Warning chimes and warning indicator
The keyless access with push-button start system sounds a warning chime and flashes the access key warning indicator on the combination meter in order to minimize improper operations and help protect your vehicle from theft.
For details, refer to “Warning chimes and warning indicator of the keyless access with push-button start system”.
When access key fob does not operate
Refer to “Access key fob – if access key fob does not operate properly”.
Replacing battery of access key fob
Refer to “Replacing battery of access key fob”...
Other information:
Subaru Forester 2019-2026 Owners Manual: Safety precautions
WARNING Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray of boiling hot coolant when the cap is removed. CAUTION Vehicles are filled at the factory with SUBARU SUPER COOLANT that does not require the first change for 11 years/137,500 miles (11 years/220,000 km)...
Subaru Forester 2019-2026 Owners Manual: Programming a New HomeLink Button
Indicator Light HomeLink Buttons Press and release the HomeLink button that you would like to program. The HomeLink indicator light will flash orange slowly (if not, refer to “Erasing HomeLink Buttons”). Garage door opener remote Position the hand-held remote (garage door opener remote) 1 to 3 inches (2 to 8 cm) away from the HomeLink button that you would like to program...
Categories
- Manuals Home
- Unlock using PIN Code Access
- Disabling functions
- Changing a flat tire
- New on site
- Most important about car
Windshield wiper and washer switches
The wiper operates only when the ignition switch is in the “ON” or “ACC” position.
