Subaru Forester: Door locks / Locking and unlocking from the outside
NOTE
If you unlock the driver’s door with a
key (including an emergency key) and
open the door while the alarm system is
armed, the alarm system is triggered
and the vehicle’s horn sounds. In this
case, perform any of the following
operations:
- Models with “keyless access with
push-button start system”:
- Press any button on the access
key fob (except when the access
key fob battery is discharged).
- Press the push-button ignition
switch to “ACC”.
- Carry the access key fob and
perform either of the following procedures.
- Grip the front door handle.
- Press the rear gate opener
button.
- Models without “keyless access
with push-button start system”:
- Press any button on the remote
transmitter (except when the transmitter
battery is discharged).
- Insert the key into the ignition
switch and turn the ignition switch
to “ON”.
For details about the alarm system,
refer to “Alarm system”.
Rotate the key toward the front to lock.
Rotate the key toward the rear to unlock.
In this case, only the driver’s side door is
locked or unlocked...
Other information:
To clean the seatbelts, use a mild soap and
lukewarm water. Never bleach or dye the
belts because this could seriously affect
their strength.
Inspect the seatbelts and attachments
including the webbing and all hardware
periodically for cracks, cuts, gashes, tears,
damage, loose bolts or worn areas...
Pull out the end of the blade rubber
assembly to unlock it from the plastic
support.
Pull the blade rubber assembly out of
the plastic support.
Metal spines
If the new blade rubber is not provided
with two metal spines, remove the metal
spines from the old blade rubber and install
them in the new blade rubber...