Subaru Forester: Keyless access with push-button start system (if equipped) / Disabling keyless access function
WARNING
If you wear an implanted pacemaker
or an implanted defibrillator, perform
the procedure described in
“By operating the driver’s door” to disable the keyless access
function. If you perform the procedure
described in “By operating the
access key fob”, the operation
of an implanted pacemaker or
implanted defibrillator may be affected
by the radio waves from the
transmitter antenna.
When the vehicle is not going to be used
for a long time or when you choose not to
use the keyless access function, the keyless
access function can be disabled.
NOTE
- The locking and unlocking function
by the remote keyless entry system is
not disabled.
- To start the engine while the functions
are disabled, perform the procedure
described in “Starting engine”.
This function stops the access key fob
from receiving signals and h..
By operating the access key fob
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key fob...
Other information:
Take the towing hook and screwdriver
out of the tool bucket. Take the jack handle
out of the cargo area.
Cover the tip of a flat-head screwdriver
with vinyl tape or cloth so that it will not
scratch the bumper. Pry off the cover on
the rear bumper using a screwdriver, and
you will find a threaded hole for attaching
the towing hook...
BSD/RCTA temporary stop message
BSD/RCTA OFF indicator light
This display appears when the system is
used under the following conditions.
Extremely high or low temperatures
When abnormal voltage exists for the
vehicle battery.
When the radar sensor is significantly
misaligned...