Subaru Forester: Keyless access with push-button start system (if equipped) / Power saving function

The keyless access function will be disabled in the following cases to protect the access key fob battery and the vehicle battery.

  • Case 1: When the keyless access function and the remote keyless entry system have not been used for 2 weeks or longer while all doors are locked.

    Operate one of the following items to recover the keyless access function:

    • Unlock the doors by any procedure other than gripping the front passenger’s door handle.
    • Lock the doors.
    • Open a door and then close it.
  • Case 2: When the access key fob has been left in the operating range for 10 minutes or longer while all doors are locked.

    Operate one of the following items to recover the keyless access function:

    • Unlock the doors by gripping the door handle.
    • Unlock the doors by pressing the rear gate opener button.
    • Lock the doors by touching the door lock sensor.
    • Lock or unlock the doors using the remote keyless entry system.
    • Lock or unlock the doors using the power door locking switch.
    • Open either of the front doors.

    Unlock using PIN Code Access

    W..

    Power saving function of access key fob

    This function stops the access key fob from receiving signals and helps minimize the battery consumption of the access key fob. 1. Press the button twice while holding the button...

    Other information:

    Subaru Forester 2019-2022 Owners Manual: Headlight flasher


    CAUTION Do not hold the lever in the flashing position for more than just a few seconds. To flash the headlights, pull the lever toward you and then release it. The high beam will stay on for as long as you hold the lever. When the headlights are on high beam, the high beam indicator light on the combination meter also illuminates...

    Subaru Forester 2019-2022 Owners Manual: Rear wiper


    With the switch turned to the position, the rear wiper will operate intermittently at intervals corresponding to the vehicle speed. In this position, when you move the select lever to the “R” position, the rear wiper will switch to continuous operation...

    Categories

    Driving information display

    NOTE

    You can set the units for both the multifunction display (black and white) and the combination meter at the same time. For details about setting the language and units, refer to “Type A combination meter” or “Menu screens”.

    read more

     
    Copyright © 2022 www.suforester5.com