Subaru Forester: P (Park) / R (Reverse) / N (Neutral) / D (Drive) / / N (Neutral)D (Drive)
This position is for restarting a stalled engine. In this position, the transmission is neutral, meaning that the wheels and transmission are not locked. Therefore, the vehicle will roll freely, even on the slightest incline unless the parking brake or foot brake is applied.
Avoid coasting with the transmission in neutral. Engine braking has no effect in this condition.
WARNING
Do not drive the vehicle with the select lever in the “N” (neutral) position. Engine braking has no effect in this condition and the risk of an accident is consequently increased.
R (Reverse)
This position is for backing the vehicle. To
shift from the “N”..
D (Drive)
This position is for normal driving. The
transmission shifts automatically and continuously
into a suitable gear according to
the vehicle speed and the acceleration you
require...
Other information:
Subaru Forester 2019-2026 Owners Manual: Tire pressure monitoring system (TPMS) (U.S.-spec. models)
The tire pressure monitoring system provides the driver with the warning message indicated by sending a signal from a sensor that is installed in each wheel when tire pressure is severely low. The tire pressure monitoring system will activate only when the vehicle is driven...
Subaru Forester 2019-2026 Owners Manual: P (Park) / R (Reverse) / N (Neutral) / D (Drive) /
This position is for parking the vehicle and starting the engine. In this position, the transmission is mechanically locked to prevent the vehicle from rolling freely. When you park the vehicle, first apply the parking brake firmly, then shift into the “P” position...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- How to use the high beam assist function
- All-Wheel Drive warning light
- Unlock using PIN Code Access
- New on site
- Most important about car
Type B multi-function display (color LCD)
Turn the ignition switch to “ON”.
button.
Select “Settings”.
Select “Vehicle”.
Select “Time/Date” and then select “Manual”.
to complete the
clock
setting.
Copyright © 2026 www.suforester5.com