Subaru Forester: Interior lights / OFF delay timer
The following lights have an automatic illumination function.
- Dome light
- Map light
- Cargo area light
- Rear gate light (if equipped)
When the interior light switch is set to the “DOOR” position, the light will automatically turn on and turn off depending on the locking and unlocking of the doors, the opening and closing of the doors including the rear gate, as well as the position of the ignition switch.
NOTE
The setting for the period of time in which the lights remain on (OFF delay timer) can be changed by a SUBARU dealer. Contact your SUBARU dealer for details. For models with the combination meter display (color LCD), the setting can also be changed by operating the combination meter display (color LCD). For details, refer to “Vehicle Setting”.
Rear gate light (if equipped)
Rear gate light
OFF
DOOR
OFF: The light remains off.
DOOR: The ..
Sun visors
To block out glare, swing down the visors.
To use the sun visor at a side window,
swing it down and move it sideways...
Other information:
Subaru Forester 2019-2025 Owners Manual: Rear gate – if the rear gate cannot be opened
In the event that you cannot open the rear gate by operating the rear gate opener button, you can open it from inside the cargo area. Remove the access cover at the bottom-center of the rear gate trim using a flat-head screwdriver wrapped with vinyl tape or a cloth...
Subaru Forester 2019-2025 Owners Manual: Initialization of power window (windows with off delay function)
If the one-touch auto up and down function or off delay function does not operate properly, operate each window according to the following procedure in order to initialize the power window system. Close the door. Turn the ignition switch to the “ON” position...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Unlock using PIN Code Access
- Daytime running light system
- Auto Start Stop warning light/Auto Start Stop OFF indicator light (yellow)
- New on site
- Most important about car
Type B multi-function display (color LCD)
Turn the ignition switch to “ON”.
button.
Select “Settings”.
Select “Vehicle”.
Select “Time/Date” and then select “Manual”.
to complete the
clock
setting.
Copyright © 2025 www.suforester5.com