Subaru Forester: Seat, seatbelt and SRS airbags / Rear Seat Reminder (models with combination meter display (color LCD))
This function prompts the driver to confirm
the presence of passengers and cargo in
the rear.
This function will be activated when the
rear doors are opened and closed.
It alerts the driver by warning messages on
the combination meter display (color LCD)
and beeps when the ignition switch is in
the “OFF” position.

NOTE
- This function does not directly detect
passengers and cargo in the rear
seat.
- This function detects the opening
and closing of the rear doors. In this
situation, there is the possibility that
the following phenomenon may occur.
- It may alert the driver even if there
are no passengers or cargo in the
rear seat.
- It may not alert the driver even if
there are passengers and cargo in
the rear seat.
- This function can be turned ON/OFF
using the meter customizing function.
Refer to “Function settings and adjustments
on the combination meter display
(color LCD)”.
- The ON/OFF setting will not be
changed even if the ignition switch is
turned to the “OFF” position.
The ON/OFF setting will be returned
to the default setting if the battery is
removed.
Always consult your SUBARU dealer if you
want to install any access..
Infants and small children should always
be placed in an infant or child restraint
system in the rear seat while riding in the
vehicle.
You should use an infant or child restraint
system that meets Federal Motor Vehicle
Safety Standards or Canada Motor Vehicle
Safety Standards, is compatible ..
Other information:
All doors, rear gate and the fuel filler lid are
automatically locked or unlocked under
the following conditions.
For automatic door locking
When the vehicle speed reaches 12
mph (20 km/h) or higher (factory
default setting).
When the select lever is shifted into
a position other than the “P” position...
Select the airflow mode using the airflow
mode selection dial (type A and C) or the
airflow mode selection button (type B).
Airflow modes are as follows.
If equipped
Ventilation: Instrument panel outlets
If equipped
Ventilation 2 for type B and C: Instrument
panel outlets and foot outlets
If equipped
Bi-level: Instrument panel outlets and foot outlets
If equipped
Heat: Foot outlets, both side outlets of the
instrument panel and some through windshield
defroster outlets (A small amount of
air flows to the windshield and both side
windows to prevent fogging...