Subaru Forester: Starting and operating / Starting and stopping engine (models with push-button start system)
WARNING
There are some general precautions
when starting the engine.
Carefully read the precautions
described in “Starting engine”.
If the indicator on the push-button
ignition switch flashes in
green after the engine has
started, never drive the vehicle...
Other information:
Perform the following procedure to release
the shift lock.
Apply the parking brake and stop the
engine.
Wrap the tip of a flat-head screwdriver
with vinyl tape or a cloth and use it to
remove the shift lock cover. The shift lock
release button is located under the shift
lock cover...
This light illuminates when the brake fluid
level has dropped to near the “MIN” level of
the brake fluid reservoir with the ignition
switch in the “ON” position and with the
parking brake fully released.
If the brake system warning light should
illuminate while driving (with the parking
brake fully released and with the ignition
switch positioned in “ON”), it could be an
indication of leaking of brake fluid or worn
brake pads...