Subaru Forester: Combination meter / U.S.-spec. models

The illustration above is a typical example. For some models, the combination
meter may be slightly different than that shown in the illustration.
- Tachometer
- Select lever/gear position indicator
- Combination meter display (color LCD)
- Trip meter and odometer
- Speedometer
- Fuel gauge
The illustration above is a typical example. For some models, the combination
meter may be slightly different than that shown in the illustration.
Tachometer
Select lever/gear position indicator
Trip meter and odometer
Speedometer
Fuel gauge
..
Other information:
If the one-touch auto up and down function
or off delay function does not operate
properly, operate each window according
to the following procedure in order to
initialize the power window system.
Close the door.
Turn the ignition switch to the “ON”
position...
Cruise control main button
Press the cruise control main button.
The cruise control indicator light on the
combination meter will illuminate.
Depress the accelerator pedal until the
vehicle reaches the desired speed.
Press the “RES/SET” switch to the
“SET” side and release it...
Categories
The outside temperature is displayed on
the multi-function display (color LCD).
NOTE
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following conditions.
While parking or driving at low
speeds
When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
When starting the engine after
being parked for a certain period of
time
The temperature unit cannot be
changed.
read more