Subaru Forester: Trailer towing / Warranties and maintenance
SUBARU warranties do not apply to vehicle damage or malfunction caused by trailer towing. If you use your vehicle to tow a trailer, more frequent maintenance will be required due to the additional load. (Refer to “Maintenance schedule under severe driving conditions” in the “Warranty and Maintenance Booklet”.)
Under no circumstances should a trailer be towed with a new vehicle or a vehicle with any new powertrain component (engine, transmission, differential, wheel bearings, etc.) for the first 1,000 miles (1,600 km) of driving.
Trailer towing
Y..
Maximum load limits
WARNING
Never exceed the maximum load
limits explained in the following.
Exceeding the maximum load limits
could cause personal injury and/or
vehicle damage...
Other information:
Subaru Forester 2019-2026 Owners Manual: Map lights
Door interlock switch To turn on the map light, push the lens. To turn it off, push the lens again. Automatic illumination When the door interlock switch is in the “DOOR” position, the map lights illuminate automatically in the following cases...
Subaru Forester 2019-2026 Owners Manual: Type B and C
Press the AUTO button. The indicator light “FULL AUTO” on the multi-function display (color LCD) illuminates. Set the preferred temperature using the temperature control dial. NOTE If you operate any of the buttons on the control panel other than the ON/OFF button, the rear window defogger button, the SYNC button (if equipped) and the temperature control dial(s) during FULL AUTO mode operation, the “FULL” indicator light on the control panel will turn off and the “AUTO” indicator light will remain illuminated...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Auto Start Stop warning light/Auto Start Stop OFF indicator light (yellow)
- Alarm system setting
- To activate/deactivate the X-MODE
- New on site
- Most important about car
Driving information display
NOTE
You can set the units for both the multifunction display (black and white) and the combination meter at the same time. For details about setting the language and units, refer to “Type A combination meter” or “Menu screens”.
