Subaru Forester: Warning and indicator / Automatic headlight beam leveler warning light / LED headlight warning light
Automatic headlight beam leveler warning light
This light illuminates when the automatic headlight beam leveler does not operate normally.
If this light illuminates during driving, have your vehicle inspected at your SUBARU dealer.
LED headlight warning light
This light illuminates if the LED headlights malfunction. Have your vehicle inspected at a SUBARU dealer as soon as possible.
Steering Responsive Headlight warning light / Steering Responsive Headlight
OFF indicator light
This light illuminates when the Steering
Responsive Headlight OFF switch is
pressed to deactivate the Steering Responsive
Headlight. Also, the light flashes
when a malfunction occurs in the Steering
Responsive Headlight...
Other information:
Subaru Forester 2019-2025 Owners Manual: Cruise control (if equipped)
NOTE For models with the EyeSight system: Refer to the Owner’s Manual supplement for the EyeSight system. Cruise control enables you to maintain a constant vehicle speed without holding your foot on the accelerator pedal and it is operative when the vehicle speed is 20 mph (30 km/h) or more...
Subaru Forester 2019-2025 Owners Manual: Most common causes of corrosion
The most common causes of corrosion are: The accumulation of moisture retaining dirt and debris in body panel sections, cavities, and other areas. Damage to paint and other protective coatings caused by gravel and stone chips or minor accidents...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- How to use the high beam assist function
- Replacing battery of access key fob
- Auto Start Stop warning light/Auto Start Stop OFF indicator light (yellow)
- New on site
- Most important about car
Average vehicle speed
This display shows the average vehicle speed since the trip meter was last reset. Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display. When either of the trip meter displays is reset, the corresponding average vehicle speed value is also reset.
