Subaru Forester: Driver Monitoring System (if equipped) / Driver Monitoring System ON/OFF settings
NOTE
- When the vehicle is stopped and the
driver’s door is opened and closed, the
Driver Monitoring System automatically
turns ON regardless of the pushbutton
ignition switch status.
- After the Driver Monitoring System
was turned OFF, if the Driver Monitoring
System is turned ON while the driver’s
door is open, user recognition may not
occur correctly.
- When the Driver Monitoring System
is turned OFF after user recognition
was completed, the user recognition
function stores the Driver Monitoring
System ON/OFF state.
At the time when a user is registered, the
seat position, outside mirror angle, and
reverse tilt-down outside mirror angle are
registered at the same time. To change the
setting for the seat position, outside mirror
angle, or reverse tilt-down outside mirror
angle, refer to “Driver Monitorin..
When the Driver Monitoring System OFF
switch is pressed, the Driver Monitoring
System turns OFF. When the Driver
Monitoring System is turned OFF, the
Driver Monitoring System OFF indicator
on the combination meter display will
illuminate...
Other information:
Head restraint
Release button
To remove:
Press the release button, and pull out the
head restraint.
To install:
Push the head restraint into the holes on
the top of the seatback until it locks. Press
and hold the release button to lower the
head restraint...
This mode switches the climate control
operation according to the number of
passengers.
Front occupant detection
This mode detects passenger by the
occupant detection system sensor when
there is no front passenger in the seat. The
setting temperature will be changed to the
driver’s setting temperature automatically...