Subaru Forester: Driver Monitoring System ON/OFF settings / User recognition settings
The Driver Monitoring System User recognition
function can be turned ON/OFF. For
the setting procedure, refer to “Driver
Monitoring System settings”.
NOTE
- The user recognition function
setting cannot be changed for each
individual user.
- The default setting for the user
recognition function is ON.
- When the user recognition function
is turned OFF, the following items
cannot be selected.
- Repeat facial scan
- Register User
- Update User Settings
- Delete Driver Position
The automatically retract seat on entry
which automatically slides back the driver’s
seat when the driver’s door is
unlocked and opened. This function can
be turned ON/OFF...
Other information:
At the time when a user is registered, the
seat position, outside mirror angle, and
reverse tilt-down outside mirror angle are
registered at the same time. To change the
setting for the seat position, outside mirror
angle, or reverse tilt-down outside mirror
angle, refer to “Driver Monitoring System
settings”...
Air bag warning light
The air bag warning light on the instrument panel is designed to notify you if the Supplemental Restraint System (SRS), including the side and curtain air bags used for rollover protection, requires inspection or service.
If the air bag warning light remains illuminated for longer than approximately 6 seconds after the ENGINE START/STOP button is switched to the ON position, or if it comes on while driving your Kia Telluride, one or more SRS components may not be operating correctly...