Subaru Forester 2019-2022 Owners Manual / Starting and operating / Remote engine start system (dealer option) / Entering the vehicle while it is running via remote start (models without “keyless access with push-button start system”)

Subaru Forester: Remote engine start system (dealer option) / Entering the vehicle while it is running via remote start (models without “keyless access with push-button start system”)

  1. Unlock the vehicle doors using the remote keyless entry system.

    NOTE

    If the vehicle’s doors are unlocked manually using the key, the vehicle’s alarm system will trigger (if the alarm system is armed prior to activating the remote engine start system) and the engine will turn off. Perform either of the following procedures to disarm the alarm system. Refer to “Alarm system”.

    1. Insert the key into the ignition switch and turn it to the “ON” position.
    2. Press any button on the remote keyless entry transmitter.
  2. Enter the vehicle. The engine will shut down when any door or rear gate is opened.
  3. Insert the key into the ignition switch and turn it to the “START” position to restart the engine.

    Alternate operation method for models with “keyless access with push-button start system”

    ..

    Entering the vehicle while it is running via remote start (models with “keyless access with push-button start system”)

    Unlock the vehicle doors using the keyless access function and remote keyless entry system.NOTE If the vehicle’s doors are unlocked manually using the key, the vehicle’s alarm system will trigger (if the alarm system is armed prior to activating the remote engine start system) and..

    Other information:

    Subaru Forester 2019-2022 Owners Manual: Locking and unlocking


    Release button Emergency key While pressing the release button of the access key fob, take out the emergency key. Lock or unlock the driver’s door with the emergency key in the procedure described in “Locking and unlocking from the outside”...

    Subaru Forester 2019-2022 Owners Manual: Remote transmitter program (Remote engine starter transceiver)


    New transmitters can be programmed to the remote engine start system in the event that a transmitter is lost, stolen, damaged or additional transmitters are desired (the system will accept up to eight transmitters). New remote engine start transmitters can be programmed according to the following procedure...

    Categories

    Driving information display

    NOTE

    You can set the units for both the multifunction display (black and white) and the combination meter at the same time. For details about setting the language and units, refer to “Type A combination meter” or “Menu screens”.

    read more

     
    Copyright © 2022 www.suforester5.com