Subaru Forester: Opening and closing / Immobilizer system
The Kia Telluride is equipped with an immobilizer system designed to help protect the vehicle against theft. If an incorrectly coded key or an unauthorized device is used, the vehicle's power system is disabled to prevent the engine from starting.
When the ENGINE START/STOP button is placed in the ON position, the immobilizer indicator should illuminate briefly and then turn off. If the indicator continues flashing, the system has not recognized the coding stored in the smart key.
Return the ENGINE START/STOP button to the OFF position, then switch it back to the ON position and try again.
If the immobilizer repeatedly fails to recognize the smart key, contact an authorized Kia dealer for diagnosis and service.
Do not attempt to modify the immobilizer system or install additional electronic devices that interfere with its operation. Unauthorized modifications may create electrical problems and could prevent your Kia Telluride from operating properly.
Deactivating the immobilizer system
Press the ENGINE START/STOP button to the ON position using a properly registered smart key.
Activating the immobilizer system
Move the ENGINE START/STOP button to the OFF position. The immobilizer system activates automatically. Without a valid registered smart key, the Kia Telluride engine cannot be started.
TIP
-
When starting the Kia Telluride, avoid placing other immobilizer-equipped keys close to the registered smart key. Multiple coded keys near each other may interfere with proper recognition, preventing the engine from starting or causing it to stop shortly after startup.
-
If additional smart keys are required or an existing key has been lost, contact an authorized Kia dealer.
-
To help protect your vehicle against theft, never leave spare keys inside the vehicle. Your immobilizer password is unique to your vehicle and should remain confidential. Do not store this information anywhere inside the Kia Telluride.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
-
This device may not cause harmful interference.
-
This device must accept any interference received, including interference that may result in undesired operation.
TIP
Changes or modifications that are not expressly approved by the party responsible for compliance may void the user's authority to operate this equipment. If the Kia Telluride keyless entry system becomes inoperative because of unauthorized modifications or alterations, the resulting damage will not be covered under the manufacturer's vehicle warranty.
Theft-alarm system
The Kia Telluride theft-alarm system is designed to help protect your vehicle against unauthorized entry and attempted theft by monitoring key access points and activating an audible and visual warning when necessary...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Luggage volume
MIN: Behind the 3rd row. MAX: Behind the front seat to the roof. Item 7 seats 8 seats Luggage volume (SAE) [cu ft (L)] MIN...
Subaru Forester 2019-2026 Owners Manual: Average fuel consumption
Displays the driving range per gallon of fuel Displays the driving range per liter of fuel Displays the fuel consumption per 100 km This display shows the average rate of fuel consumption since the trip meter was last reset. TRIP RESET switch Press the TRIP RESET switch to switch between the displays for the average fuel consumption that corresponds to the A trip meter mileage and the average fuel consumption that corresponds to the B trip meter mileage...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Instrument panel
- If the passenger’s frontal airbag OFF indicator illuminates and the ON indicator turns off even when the front passenger’s seat is occupied by an adult
- Vehicle load limit – how to determine
- New on site
- Most important about car
Outside temperature indicator
The outside temperature is displayed on the multi-function display (color LCD).
NOTE
The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.